![]() Optics include a tightly focused uniform lens for narrow version. To achieve this, the RC130 contains special lenses for creating this near collimated light pattern. The RCC130 was designed to produce a narrow uniform/homogenous light pattern. Optics include a focused uniform lens for wide vision. The RC130 was designed to produce a large uniform/homogenous light pattern. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kits adapters. The 0-10 VDC intensity control assists in gaining full control of the light output. The RC130 and RCC130 operates with either an NPN or a PNP signal and runs on an industry standard 24 VDC. Its simple plug and play 5 Pin M12 connector allows for ease of use while allowing for full control. ![]() The all metal construction of the Ring Light Series of lights provides a small particle resistant and all around durable light. Light can be controlled by a manual potentiometer or a 0-10VDC analog signal. The integrated driver also includes variable light intensity control. No need for an external driver to control the light. ![]() Ring Light includes an integrated constant current driver with a built in strobe input with option for PNP or NPN trigger control. Ring Lights are available in light output of White, Red, Amber, Blue, Green, Cyan, IR and UV. Housing uses industry standard T-Slots for ease of mounting. The EZ Mount LED Ring Light are a high output LED light in an aluminum housing. Fourth way to mount the light is using the threaded M4 holes on the back plate of light. Standard industrial T-nuts can be dropped into the slot for mounting. Step up and Step down adapter rings are not included with the light. In those few cases where the lens's locking thumbscrews may prevent the lens from fitting through the center of the EZ Mount LED Ring Light, extra low-profile replacement set screws are included, allowing the protruding thumbscrews to be removed. A flange at the front end of the EZ Mount LED Ring Light holds the step ring with three set screws, and the camera lens is inserted through the center of the EZ Mount LED Ring Light and threaded onto the step ring. Once again, an off-the-shelf step up or step down adapter ring can be used to adapt lenses with M43 or smaller filter mounting threads. Second is the ability to mount the lens at the front end of the EZ Mount LED Ring Light. Using readily available step-up or step-down rings it can be mounted directly to the threads found on the front end of most lenses. First, there is a standard M46 thread protruding from the back of the EZ Mount LED Ring Light. The EZ Mount LED Ring Light can be quickly and easily adapted to any vision system with either of four standard mounting options. Conversion adapters for different camerasĪll EZ Mount LED Ring Light Mount Directly to a Camera Lens.RC130 Near Collimated EZ Mount Ring Light (R80 Pictured)
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |